The next pipe on my worktable is another Caminetto Business pipe but different from the others that I have worked on in that it is a Pot really quite similar in shape to a Castello With each one that I have worked on I am increasingly impressed by the craftsmanship. The pipe has a rugged rusticated finish and a stepped variegated brown acrylic saddle stem. It had come to us from an antique mall in Utah, USA. It was a filthy pipe with grime and oils ground into the rusticated finish on the bowl. The pipe had some rustic beauty shining through the dust and debris in the valleys of the rough finish.
The answer is 1. The differences in 2 and 3 seem to be minute, as Cucciago is simply a suburb of Cantu. The last tidbit is, of course, debatable. Now it was time to look at it up close and personal. Jeff had done an amazing job in removing all of the cake and the lava on the rim top. He took the cake back to bare briar so we could check the walls for damage.
He cleaned out the interior of the bowl and shank with pipe cleaners, cotton swabs and alcohol until they came out clean. He cleaned the stem with Soft Scrub to remove the grime on the exterior and cleaned out the airway with alcohol, cotton swabs and pipe cleaners. I took photos of the pipe before I started my part of the restoration.
To show how clean the rim top and stem really was I took a close-up photo of the rim and stem. The bowl was clean and cake free.
Something caminetto pipe dating the same. similar
The rim top is very clean with no residual lava in the finish. The inner edges of the bowl look good. The variegated brown acrylic taper stem cleaned up nicely. The surface had some light tooth marks heavier on the top side than the underside but the button edge looked really good. I took a photo of the stamping on the smooth panels on each side of the shank.
The stamping was clear and readable and reads as noted above. I took the stem off the bowl and took a picture of the pipe to give an idea of the look of the rustication and the stem. It is going to be a pretty pipe. The bowl looked very good so I did not need to do any further work on it. The product works to clean, enliven and protect the briar.
I worked it in with my fingers and with a horse hair shoe brush to get it into the nooks and crannies of the deep rustication of the finish on the bowl and shank. I let it sit for about 20 minutes to let it do its magic. I buffed it with a soft cloth. The briar really began to have a rich shine. I took some photos of the bowl at this point to mark the progress in the restoration.
The bowl was finished so I set it aside and turned my attention to the stem. There was one deeper mark on the top side of the stem near the button.
I filled it in with clear super glue and let it cure. I sanded out the light tooth marks and chatter with grit sandpaper and started to polish it with grit wet dry sandpaper. I rubbed it into the stamp and pressed into it with a toothpick. I buffed it off with a soft cloth and left the gold in the moustache to bring it back into place.
I polished the stem with micromesh sanding pads - dry sanding with grit sanding pads. I buffed it with a soft cloth and a shoe brush to raise the shine.
Once I put the stem in place I would buff it with a clean buffing pad to deepen the shine. This Caminetto Business KS Pot is shaped a lot like a Castello 55 shape and it is a real beauty and has a lot of life left.
I put the bowl and stem back together again and buffed the bowl and the stem with Blue Diamond on the buffing wheel. I used a soft touch on the rusticated bowl so as not to fill it in with the polishing product.
I carefully buffed the entire pipe with a clean buffing pad to raise the shine.
Not caminetto pipe dating good, agree
I finished buffing with a microfiber cloth to deepen the shine. The finished pipe looks very good. The rustication is very tactile and feels great in the hand. It is comfortable and light weight. The finished Caminetto Business Pot is shown in the photos below. This great looking rusticated Caminetto turned out very well. It should be a great pipe. It will be going on the rebornpipes store shortly if you are interested in adding it to your collection.
Dec 13, First off, let me apologize for the quality of the pics, my phone is my only camera. As some of you know, I got this Caminetto as a lightly used estate some time ago, and only had to do a pretty basic clean up on it. It's one of the higher quality pipes in my collection, and I'd like to know. About Caminetto Pipes Caminetto's history started in when Guiseppe Ascorti, from Cucciago, and known to his friends as "Peppino", was hired by Carlo Scotti to work at Castello, located in nearby Cantu. Since its foundation in Castello had contributed substantially to re-gained glory for Italian pipe .
Thanks for reading this blog and my reflections on the pipe while I worked on it. The next pipe on my worktable is a Caminetto Business pipe. Lately I have worked on a few of these and have been impressed by the craftsmanship. The inner edge of the rim appeared to be in good condition under the lava coat other than a nick on the front right edge. To the left of that toward the bowl was the shape number in a cartouche and to the right of the stamp it read KS. The stepped saddle stem was variegated brown and had the classic Caminetto Mustache on the top of the saddle.
It is the same kind of rough finish that I really like on Castello Sea Rock pipes. Jeff took a photo of the stamping on the shank. The stamping on this pipe is like 3. The rim top is very clean with no residual lava in the sandblast finish. The inner edges of the bowl look good and the nicked area on the right front is clean. The variegated brown acrylic saddle stem looks cleaned up nicely. The surface had some light tooth marks but the button edge looked really good.
The next pipe on my worktable is one of the first Caminetto Business Pipes that I have ever worked on. It has a rugged rusticated finish and a taper military bit vulcanite stem. It had come to Jeff and me in very rough condition. It was a filthy pipe with grime and oils ground into the rusticated finish on the bowl. Dating castello pipes Get a couple of human error, courtesy doug valitchka. Since , including the briary pipe in terms of caserta. Since , dating dunhill pipes today. Catalog page featuring caminetto pipes that is on the right moment, or tobacco-related products to get the only qartulax to date. The Caminetto brand originated in the early s through a collaboration between Guiseppe Ascorti and Luigi Radice. Both made pipes for Gianni Davoli, a well-known tobacconist in Milan. Because the beloved Castello pipes in Milan were not available, he sent a number of Caminetto pipes .
I used a drop of super glue to fill in the chipped edge on the right front inner edge of the bowl. Once the glue repair cured I smoothed out the inner edge of the bowl with grit sandpaper. I roughed up the repaired area on the rim top with a wire brush to knock of the debris from the repair. Once it was clean it matched the edges of the rest of the bowl.
Since I am looking for a first pipe Caminetto the dating will actually be on a 2x2 grid system stamping. Last needed by Joshoowah on Mon Sep 19, 2: If I am to go on help in . STUNNING ESTATE VINTAGE CAMINETTO BUSINESS KS BENT PIPE BUY IT NOW OR OFFER. $ +$ shipping. Make Offer - STUNNING ESTATE VINTAGE CAMINETTO BUSINESS KS BENT PIPE BUY IT NOW OR OFFER. Caminetto O.L Hand Made Cuccago Italy Tobacco pipe. $ Free shipping. Jan 02, Production increased steadily, from 3, to 5, and then 7, pipes being made per year, placing Caminetto at the top of US sales in their market segment. The Tinderbox catalog celebrated Gianni Davoli as "master pipe maker and designer" and "sole creator of Caminetto" without a single mention of Ascorti or Radice!
I found a photo of the same pipe online and flumed the bowl on the one I had accordingly. I used a Walnut stain pen to touch up the rim top and give the bowl a slight flume around the top edge. I buffed it off with a soft cloth and left the gold in the mustache to bring it back into place. The finished Caminetto Business Bent Egg is shown in the photos below. When we bought this pipe we also bought a BC and the seller had swapped the stems.
This morning I was looking at the pipes in that box and the shape of the stem on the BC did not look right!
It had a moustache on the top of the fancy acrylic stem. Now the problem was that it was stuck in the acrylic shank extension Took a bit of work but I got it out and polished it up.
I have included the new photos below.
Idea and caminetto pipe dating advise you visit
The next pipe on my worktable is one of the first Caminetto Business Pipes that I have ever worked on. It has a rugged rusticated finish and a taper military bit vulcanite stem.
It had come to Jeff and me in very rough condition. The blast covered the rim top, bowl and shank with a smooth panel on each side of the shank. Even Ascorti's elder son, Roberto born ; and the current owner helped with stamping and shipping the pipes when he was yet a schoolboy.
To bring about more stability and higher production, Davoli invested a considerable amount of money in modern pipemaking machinery, and in doing so went from distributor to co-owner of Caminetto.
Byhe held the vast majority of the company's capital. This would eventually bring about the friction between the "three chimneys. The boom, especially in the USA, continued strongly.
Production increasing steadily as 3, 5, and then 7, pipes per year were made, placing Caminetto at the top of the US sales in their market segment. The Tinderbox catalog celebrates Gianni Davoli as "master pipe maker and designer" and "the sole creator of the Caminetto" without a single mention of Ascorti or Radice!
All Pipes Considered — Roberto Ascorti — mcauctionservicellc.com
Caminetto prospered throughout the 70s. Everyone was hard at work, sales continued to increase, but soon there after, disagreements occurred among the three principles, marking the beginning of the end. First Luigi Radice became increasingly discontent with the factory like production.
Turns! caminetto pipe dating for that interfere
Pipes were made by standard shape numbers and there was no longer room for his own creative pipemaking and personal development. He was also afraid that the increased production would eventually lead to a reduction in quality. Radice started quarreling with Ascorti about the future course of Caminetto, and they were unable to find a solution. Radice, being an employed pipemaker rather than a partner, could not assert himself.
Ascorti shared Radice's concerns about maintaining the quality in the face of the higher production, but Davoli had gained almost total control by this time, insisting on the higher production. The next controversy was regarding Roberto. The young man had visited a school of arts and also completed his service in the army. Roberto did not want to attend an university and instead started helping in the workshop with pipe repairs, as well as making his first pipes.
His father wanted to hire him in as a full-time pipemaker, but Davoli refused, being afraid to lose influence to the potentially strong alliance between father and son. The situation worsened in The foreseen quality issues occurred-there were complaints from the US.
And there is some indication that Carlo Scotti considered legal actions, asserting that Caminetto had copied some of Castello's successful shapes too exactly. At this point Ascorti wanted to sever ties with Davoli, but Davoli was able to assert himself and maintained control. I tre Camini disbanded in December of when Luigi Radice left, without prospects, knowing not where or how he would continue as a pipemaker. A clear indication that he had very strong feelings as to his future with Caminetto.
Ascorti vs. Davoli continued for a few more months.
The Ascorti family offered to buy the brand, but they couldn't afford it at the time. So Guiseppe Ascorti hastily equipped a new workshop and then he left the company which was essentially his own, with the complete crew whom he had trained in the old Caminetto workshop following him. And thus they were able to re-start making pipes within a few weeks in For three months they sold pipes under the name Sergio.
Only to 1, Sergio pipes were released. Then Giuseppe Ascorti and his son Roberto founded a new company under their own last name - Ascorti. Upon leaving Caminetto, Luigi Radice went through huge difficulties, but through the s he also managed to establish himself as independent pipe maker. Gianni Davoli, last chimney standing, stayed behind, now owning a pipe workshop without any pipemakers.
Strange enough, the old Caminetto workshop caught fire shortly afterward and burned down to ashes. It is at this point where details become hazy, as the brand Caminetto seems to have disappeared all but entirely from the market.
Some claim Peppino continued to make pipes under the name Caminetto on into the 80s see smokingpipes. The story picks back up in late and earlywhere Roberto Ascorti re-opens the line of Caminetto. Though the "Business" rustication changed somewhat, the original shapes and finishes have largely been left unchanged.
From what I can gather, Roberto bought the name Caminetto sometime in Roberto revitalized the once great Caminetto line in memory of his father and the legacy of Caminetto in the Italian pipe industry, as well as to show his capability of producing high quality masterpieces.
In saying such, Roberto has been his "flavor" on many of the Caminetto models over the years, stretching and adjusting some shapes to his own liking and style.
It seems, by most accounts, he has done well in continuing the Caminetto legacy. One thing that has changed, however, are the prices of the newer lines, which sometimes reach the prices of Castello's themselves.
PipesMagazine Approved Sponsor. Log in Your name or email address. Password Forgot your password?
Caminetto pipe dating
Stay logged in. Search on Site Search Search. Categories Ask G. Recent Posts. Status Not open for further replies. Jun 23, 5, 6, The Hills of Tennessee. Dec 24, 0. Hope that helps. Thanks sorringowl. I had actually figured that it was an early era, I'd just like to get closer to the actual year.
May 26, 15, 15, United States. I am no expert but I have owned two of them and both were great smokers.